The Best Dual-Touch Technology for Interactive Classrooms
KetabBoard was designed by the eorts of expert team composed of specialists and developers. With an ergonomic interface, it combines the simplicity of traditional teaching tools with the advantages provided by the most advanced teaching technologies available.
Scanning IR (Infrared) LED Optical KetabBoard is based on scanning IR LED technology which uses a combination of IR LEDs and photo transistors that are aligned in pairs around the active surface. These pairs of LEDs and photo transistors cast a grid over this surface. When the surface is touched, the beam of infrared light between the LEDs and the photo transistors is interrupted at the point of touch. This position is converted into an ‘X’ and ‘Y’ coordinates which the computer then converts into a touch position.
Ceramic Enamel Steel Writing And Projection Delivering exceptional quality and durability, combined with environmental responsibility, ceramic enamel steel surface is the irst and only surface to achieve Cradle to Cradle™ Silver certiication. This surface is produced by means of an ISO 9001 and ISO 14001 controlled.
Multifunction Touch Toolbars
16 function buttons (hotkeys) of the most common computer functions to be easily accessible by users.
True Dual-Touch Detection
The KetabBoard system enables up to two users to work together on the interactive whiteboard using their ingers or stylus pens. This truly dual-touch whiteboard requires no separate multi-user mode setting.
The KetabBoard system with standard built-in USB port allows easy connection to computers.
Finger, Pen, Pointer Touch
Users can write, draw and move objects with a inger, pen or pointer.
Ceramic Enamel Steel Surface
Ceramic enamel steel surface is the industry’s premiere ecologically intelligent whiteboard writing and projection surface.
Low Power Consumption
Obtains power from the computer through USB cable with very low power consumption and no need for external power supply.
|Technology||Scanning IR LED|
|Interface to Computer||USB 2.0|
Note: Response time can be 6 ms to 12 ms depending on PC speciications
|Input Method||Finger, Pen, Pointer|
|Finger Touch Accuracy||± 1 mm|
84 Inches (Diagonal)
169.2 cm (W) X 128.4 cm (H) X 3 cm (D)
78 Inches (Diagonal)
158.6 cm (W) X 117.8 cm (H)
77 Inches (Diagonal)
155.4 cm (W) X 117.8 cm (H)
|Screen Resolution||12800 (W) X 9600 (H)|
|Projection and Writing Surface||Low gloss (LG) Ceramic Enamel Steel|
5V USB power supply
Maximum operating current 250 mA
|Operating Temperature||5 to 35 degree C.|
|Storage Temperature||-40 to 50 degree C.|
|Storage Humidity||Up to 80% non-condencing|
|Certiicates||FCC, CE, RoHS|
|Supported Operating Systems||Windows 7 32/64-bit
Windows 8 32/64-bit
|Warranty||Refer to Ketab warranty terms|